| |
Skybolt CLoc® 2000
Series Fasteners |
|
|
|
|
|
|
| |
3 - Piece Series (Stud/Retainer - Locking Receptacle) |
|
|
|
| |
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
SK2500 and |
|
|
SK2600
and |
SK2700, SK2800 |
|
|
|
| |
|
ZG2500 Series |
|
|
|
ZG2600 Series |
ZG2800 |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For 2500 and
2600 Series Studs, Drill Panel to .257 |
|
|
For 2700 and 2800 Series
Studs Non-Coutersunk or Non-Dimpled Panels - |
|
|
| |
(Note:
For panel thickness greater than .065, Drill Panel to .281) |
|
Drill Panel to .310+ (Note:
SK2600-SW Retainers will not work) |
|
|
|
| |
|
|
|
|
|
|
Dimpled Panels - Drill to .213 (#3) then
dimple to 100 degrees |
|
|
|
| |
|
|
| |
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
Outer Panel |
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
|
Retainers - See Page 9 |
|
|
| |
|
|
|
|
| |
|
|
| |
SK212-10 |
|
|
|
|
SK212-12 |
|
|
| |
Drill Center Hole to
.4375 (11.11mm) for all panels |
|
Drill Center Hole
to .500 (12.7mm) for all panels |
|
|
|
| |
|
|
Inner Panel |
|
|
|
| |
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
Receptacles - See Page 10 thru 13 |
|
|
|
| |
|
|
|
|
|
|
| |
Note: Add .100 to receptacle depth to allow for
fastener protrusion when cycled lock to unlock (.500 + .100) = Clearance
Requirement |
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Skybolt
CLoc® 2000 Series Common Sets |
|
|
|
|
|
| Forget Charts - The followings assemblies solve 99% of all applications |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
Stainless Series - Flush Head |
|
Skytanium® Series - Flush Head |
|
|
|
| |
SK28S3-SET1 $7.04 |
Total |
ZG28S3-SET1 $7.04 |
|
Total |
|
|
|
| |
|
|
|
Grip Range |
|
|
|
Grip Range |
|
|
|
| |
SK28S3-2S Phillips Stud |
.020-.340 |
ZG28S3-2 Phillips Stud |
|
.020-.340 |
|
|
|
| |
SK2600-LWS Stud Retainer |
|
SK2600-LWS Stud Retainer |
|
|
|
|
|
| |
SK213-2
Adjustable Receptacle |
|
SK213-28 Adjustable Receptacle |
|
|
|
|
|
| |
3/32" Rivets |
|
|
|
1/8" Rivets |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Most Common Aircraft Set |
|
Most Common NASCAR Set |
|
|
|
| |
|
|
|
|
|
|
Stainless Series - Protruding Head |
Skytanium® Series - Protruding Head |
|
|
|
| |
SK26S51-SET1 $7.26 |
Total |
ZG2600-SET1 $7.88 |
|
Total |
|
|
|
| |
|
|
|
Grip Range |
|
|
|
Grip Range |
|
|
|
| |
SK26S51-1S Phillips Stud |
.020-.400 |
ZG2600-1 Collared Slot Stud |
|
.020-.400 |
|
|
|
| |
SK2600-LWS Stud Retainer |
|
SK2600-LWS Stud Retainer |
|
|
|
|
|
| |
SK213-2 Adjustable Receptacle |
|
SK213-28 Adjustable Receptacle |
|
|
|
|
|
| |
3/32" Rivets |
|
|
|
1/8" Rivets |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
 |
|
|
|
ZG28S3/SK28S3
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| What
does Overlap Mean? |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
.250 Inches from edge of
Outer Panel to center of fastener stud (.280 Preferred) |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
Outer Panel |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Inner Panel |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Overlap (Lip Required) |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
Overlap Minimum = .750 |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| Installation Tools Required - |
|
|
|
|
|
|
|
|
|
| Template-213 |
Template to drill rivet
holes with #30 Drill |
$1.25 |
|
|
|
|
|
|
|
|
|
PG 2 |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
| |
|
|
|
| |
Skybolt CLoc®
SK2500 ZG2500 Protruding Head Series |
|
|
|
| |
Stainless &
Skytanium® |
|
|
|
|
|
|
|
|
| |
3 - Piece Series (Stud/Retainer - Locking Receptacle) |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Light Weight Aerospace
Panel Fasteners - 50% Weight Savings |
|
|
|
|
|
|
| |
Designed for Restrictive
(Minimum Overlap) Mounting Surfaces |
|
|
|
|
|
|
| |
Reduced Thru-Hole
Diameter For Mounting Close to Edge |
|
|
|
|
|
|
| |
TSO-C148 Approved.
Designed to Exceed NASM5591 |
|
|
|
|
|
|
|
| |
Honeywell-Airbus Approvals - A380 Avionics |
|
|
|
|
|
|
|
| |
Tensile/Shear Loads of 200 LBS Working - 300 Lbs Plus Ultimate |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
ZG2500 Series Collared Slot |
|
|
|
|
|
|
|
(A= .370) |
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
SK2500 Series Standard
Slot |
|
|
|
|
|
| |
|
|
|
(A= .302)) |
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
SK25S51 Series Phillips |
|
|
|
| |
(A= .302)) |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
SK212-10 Series
Fixed Depth
Receptacle
Combined Panel
|
|
|
|
Total
Stud Length
L
|
|
|
|
Thickness
Decimal
|
|
Thickness
Millimeter
|
|
|
| Note:
2500 Series Studs may use SK212-10, SK212-12, 0r SK213 Series Receptacles |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
Protruding Head |
|
|
|
|
| |
|
|
|
|
|
|
2500 Series Stud |
|
|
|
|
| |
|
|
|
|
|
|
Stainless |
Stainless |
Skytanium |
Skytanium |
|
|
|
| |
Min |
Max |
Min |
Max |
Decimal |
Millimeter |
Standard Slot |
Phillips |
Collared Slot |
Phillips (1) |
|
|
|
| |
.030 |
.059 |
0.762 |
1.499 |
.760 |
19.304 |
SK2500-1S |
SK25S51-1 |
ZG2500-1 |
ZG25S51-1 |
|
|
|
| |
.060 |
.089 |
1.524 |
2.261 |
.790 |
20.066 |
SK2500-2S |
SK25S51-2 |
ZG2500-2 |
ZG25S51-2 |
|
|
|
| |
.090 |
.119 |
2.286 |
3.023 |
.820 |
20.828 |
SK2500-3S |
SK25S51-3 |
ZG2500-3 |
ZG25S51-3 |
|
|
|
| |
.120 |
.149 |
3.048 |
3.785 |
.850 |
21.590 |
SK2500-4S |
SK25S51-4 |
ZG2500-4 |
ZG25S51-4 |
|
|
|
| |
.150 |
.179 |
3.810 |
4.547 |
.880 |
22.352 |
SK2500-5S |
SK25S51-5 |
ZG2500-5 |
ZG25S51-5 |
|
|
|
| |
.180 |
.209 |
4.572 |
5.309 |
.910 |
23.114 |
SK2500-6S |
SK25S51-6 |
ZG2500-6 |
ZG25S51-6 |
|
|
|
| |
.210 |
.239 |
5.334 |
6.071 |
.940 |
23.876 |
SK2500-7S |
SK25S51-7 |
ZG2500-7 |
ZG25S51-7 |
|
|
|
| |
.240 |
.269 |
6.096 |
6.833 |
.970 |
24.638 |
SK2500-8S |
SK25S51-8 |
ZG2500-8 |
ZG25S51-8 |
|
|
|
| |
.270 |
.299 |
6.858 |
7.595 |
1.000 |
25.400 |
SK2500-9S |
SK25S51-9 |
ZG2500-9 |
ZG25S51-9 |
|
|
|
| |
.300 |
.329 |
7.620 |
8.357 |
1.030 |
26.162 |
SK2500-10S |
SK25S51-10 |
ZG2500-10 |
ZG25S51-10 |
|
|
|
| |
.330 |
.359 |
8.382 |
9.119 |
1.060 |
26.924 |
SK2500-11S |
SK25S51-11 |
ZG2500-11 |
ZG25S51-11 |
|
|
|
| |
.360 |
.389 |
9.144 |
9.881 |
1.090 |
27.686 |
SK2500-12S |
SK25S51-12 |
ZG2500-12 |
ZG25S51-12 |
|
|
|
| |
.390 |
.419 |
9.906 |
10.643 |
1.120 |
28.448 |
SK2500-13S |
SK25S51-13 |
ZG2500-13 |
ZG25S51-13 |
|
|
|
| |
.420 |
.449 |
10.668 |
11.405 |
1.150 |
29.210 |
SK2500-14S |
SK25S51-14 |
ZG2500-14 |
ZG25S51-14 |
|
|
|
| |
.450 |
.479 |
11.430 |
12.167 |
1.180 |
29.972 |
SK2500-15S |
SK25S51-15 |
ZG2500-15 |
ZG25S51-15 |
|
|
|
| |
.480 |
.509 |
12.192 |
12.929 |
1.210 |
30.734 |
SK2500-16S |
SK25S51-16 |
ZG2500-16 |
ZG25S51-16 |
|
|
|
| |
Note: See page 9 for plating options and part#
suffix Note (1) ZG25S51 use stainless
stud/Skytanium cup. |
|
|
|
|
| |
|
|
|
|
|
PG 3 |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
|
Skybolt CLoc ® SK2500 ZG2500 Flush Head
Series
Stainless & Skytanium ®
3- Piece Series ( Stud / Retainer - Locking Receptacles)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
Light Weight Aerospace Panel Fasteners - 50% Weight Savings |
|
|
|
|
|
Designed for Restrictive (Minimum Overlap) Mounting Surfaces |
|
|
|
|
|
Reduced Thru-Hole Diameter For Mounting Close to Edge |
|
|
|
|
|
Tensile/Shear Loads of 200 LBS
Working - 300 Lbs Plus Ultimate |
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
| Note:
2500 Series Studs may use SK212-10, SK212-12, or SK213 Series Receptacles |
|
|
|
|
|
| |
|
|
|
|
|
|
| SK212-10 Series |
|
|
|
|
|
|
|
|
| Fixed Depth |
|
|
|
|
|
|
|
|
|
Flush Head
2500 Series Stud
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
| Receptacle |
|
|
|
|
|
|
|
|
| Combined Panel |
Total |
|
|
|
|
|
|
| Thickness |
Thickness |
Stud Length |
|
|
|
|
|
|
| Decimal |
|
Millimeter |
L |
Stainless |
Skytanium |
|
|
|
|
| Min |
Max |
Min |
Max |
Decimal |
Millimeter |
Phillips |
Phillips (1) |
|
|
|
|
| .030 |
.059 |
0.762 |
1.499 |
.610 |
15.494 |
SK25S3-1S |
ZG25S3-1 |
|
|
|
|
| .060 |
.089 |
1.524 |
2.261 |
.640 |
16.256 |
SK25S3-2S |
ZG25S3-2 |
|
|
|
|
| .090 |
.119 |
2.286 |
3.023 |
.670 |
17.018 |
SK25S3-3S |
ZG25S3-3 |
|
|
|
|
| .120 |
.149 |
3.048 |
3.785 |
.700 |
17.780 |
SK25S3-4S |
ZG25S3-4 |
|
|
|
|
| .150 |
.179 |
3.810 |
4.547 |
.730 |
18.542 |
SK25S3-5S |
ZG25S3-5 |
|
|
|
|
| .180 |
.209 |
4.572 |
5.309 |
.760 |
19.304 |
SK25S3-6S |
ZG25S3-6 |
|
|
|
|
| .210 |
.239 |
5.334 |
6.071 |
.790 |
20.066 |
SK25S3-7S |
ZG25S3-7 |
|
|
|
|
| .240 |
.269 |
6.096 |
6.833 |
.820 |
20.828 |
SK25S3-8S |
ZG25S3-8 |
|
|
|
|
| .270 |
.299 |
6.858 |
7.595 |
.850 |
21.590 |
SK25S3-9S |
ZG25S3-9 |
|
|
|
|
| .300 |
.329 |
7.620 |
8.357 |
.880 |
22.352 |
SK25S3-10S |
ZG25S3-10 |
|
|
|
|
| .330 |
.359 |
8.382 |
9.119 |
.910 |
23.114 |
SK25S3-11S |
ZG25S3-11 |
|
|
|
|
| .360 |
.389 |
9.144 |
9.881 |
.940 |
23.876 |
SK25S3-12S |
ZG25S3-12 |
|
|
|
|
| .390 |
.419 |
9.906 |
10.643 |
.970 |
24.638 |
SK25S3-13S |
ZG25S3-13 |
|
|
|
|
| .420 |
.449 |
10.668 |
11.405 |
1.000 |
25.400 |
SK25S3-14S |
ZG25S3-14 |
|
|
|
|
| .450 |
.479 |
11.430 |
12.167 |
1.030 |
26.162 |
SK25S3-15S |
ZG25S3-15 |
|
|
|
|
| .480 |
.509 |
12.192 |
12.929 |
1.060 |
26.924 |
SK25S3-16S |
ZG25S3-16 |
|
|
|
|
| Note: See page 9 for plating options and part#
suffix Note (1) ZG25S3 use stainless stud/Skytanium cup. |
|
|
|
|
|
PG 3A |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
| |
|
|
|
| |
Skybolt CLoc®
SK2500 Winged & Folding Ring Series |
|
|
|
|
| |
Stainless
& Skytanium® |
|
|
|
|
|
|
| |
3 - Piece Series (Stud/Retainer - Locking Receptacle) |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
Light Weight Aerospace
Panel Fasteners - 50% Weight Savings |
|
|
|
|
|
| |
Designed for Restrictive
(Minimum Overlap) Mounting Surfaces |
|
|
|
|
|
| |
Reduced Thru-Hole
Diameter For Mounting Close to Edge |
|
|
|
|
|
|
|
| |
TSO-C148 Approved.
Designed to Exceed NASM5591 |
|
|
|
|
|
|
| |
ZG2500R Series
Honeywell-Airbus Approvals - A380 Avionics |
|
|
|
|
|
| |
Tensile/Shear Loads of 200 LBS Working - 300 Lbs Plus Ultimate |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
SK2500W and ZG2500W |
|
SK2500R and ZG2500R |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
Note: 2500 Series Studs may use SK212-10, SK212-12, or SK213 Series
Receptacles. |
|
|
|
|
|
 |
|
|
Winged Head
2500 Series Studs
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
Folding Ring Head
2500 Series Studs
|
|
|
|
|
|
| Receptacle |
|
|
|
|
|
|
|
|
| Combined
Panel |
|
|
|
|
|
|
|
|
|
|
| Thickness |
|
Thickness |
Stud Length |
|
|
Stud Length |
|
|
|
|
| Decimal |
|
Millimeter |
L |
Stainless |
Skytanium |
L |
Stainless |
Skytanium |
|
|
| Min |
Max |
Min |
Max |
Decimal |
Millimeter |
Wing |
Wing |
Decimal |
Millimeter |
Folding Ring |
Folding Ring |
|
|
| .030 |
.059 |
0.762 |
1.499 |
.760 |
19.304 |
SK2500-1SW |
ZG2500-1W |
.825 |
20.955 |
SK2500R1S |
ZG2500R1 |
|
|
| .060 |
.089 |
1.524 |
2.261 |
.790 |
20.066 |
SK2500-2SW |
ZG2500-2W |
.855 |
21.717 |
SK2500R2S |
ZG2500R2 |
|
|
| .090 |
.119 |
2.286 |
3.023 |
.820 |
20.828 |
SK2500-3SW |
ZG2500-3W |
.885 |
22.479 |
SK2500R3S |
ZG2500R3 |
|
|
| .120 |
.149 |
3.048 |
3.785 |
.850 |
21.590 |
SK2500-4SW |
ZG2500-4W |
.915 |
23.241 |
SK2500R4S |
ZG2500R4 |
|
|
| .150 |
.179 |
3.810 |
4.547 |
.880 |
22.352 |
SK2500-5SW |
ZG2500-5W |
.945 |
24.003 |
SK2500R5S |
ZG2500R5 |
|
|
| .180 |
.209 |
4.572 |
5.309 |
.910 |
23.114 |
SK2500-6SW |
ZG2500-6W |
.975 |
24.765 |
SK2500R6S |
ZG2500R6 |
|
|
| .210 |
.239 |
5.334 |
6.071 |
.940 |
23.876 |
SK2500-7SW |
ZG2500-7W |
1.005 |
25.527 |
SK2500R7S |
ZG2500R7 |
|
|
| .240 |
.269 |
6.096 |
6.833 |
.970 |
24.638 |
SK2500-8SW |
ZG2500-8W |
1.035 |
26.289 |
SK2500R8S |
ZG2500R8 |
|
|
| .270 |
.299 |
6.858 |
7.595 |
1.000 |
25.400 |
SK2500-9SW |
ZG2500-9W |
.1065 |
2.705 |
SK2500R9S |
ZG2500R9 |
|
|
| .300 |
.329 |
7.620 |
8.357 |
1.030 |
26.162 |
SK2500-10SW |
ZG2500-10W |
1.095 |
27.813 |
SK2500R10S |
ZG2500R10 |
|
|
| .330 |
.359 |
8.382 |
9.119 |
1.060 |
26.924 |
SK2500-11SW |
ZG2500-11W |
1.125 |
28.575 |
SK2500R11S |
ZG2500R11 |
|
|
| .360 |
.389 |
9.144 |
9.881 |
1.090 |
27.686 |
SK2500-12SW |
ZG2500-12W |
1.155 |
29.337 |
SK2500R12S |
ZG2500R12 |
|
|
| .390 |
.419 |
9.906 |
10.643 |
1.120 |
28.448 |
SK2500-13SW |
ZG2500-13W |
1.185 |
30.099 |
SK2500R13S |
ZG2500R13 |
|
|
| .420 |
.449 |
10.668 |
11.405 |
1.150 |
29.210 |
SK2500-14SW |
ZG2500-14W |
1.215 |
30.861 |
SK2500R14S |
ZG2500R14 |
|
|
| .450 |
.479 |
11.430 |
12.167 |
1.180 |
29.972 |
SK2500-15SW |
ZG2500-15W |
1.245 |
31.623 |
SK2500R15S |
ZG2500R15 |
|
|
| .480 |
.509 |
12.192 |
12.929 |
1.210 |
30.734 |
SK2500-16SW |
ZG2500-16W |
1.275 |
32.385 |
SK2500R16S |
ZG2500R16 |
|
|
| Note: See page 9 for plating options and part#
suffix |
|
|
|
|
|
| |
|
|
|
|
|
|
|
PG 4 |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
| |
Skybolt CLoc®
SK2600 ZG2600 Protruding Head Series |
|
|
|
| |
Stainless &
Skytanium® |
|
|
|
|
| |
3 - Piece Series (Stud/Retainer - Locking Receptacle) |
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
TSO-C148 Approved.
Designed to Exceed NASM5591 |
|
|
|
|
|
|
| |
Tensile/Shear Loads of 200 LBS Working - 300 Lbs Plus Ultimate |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
ZG2600 Series Collared Slot |
|
|
|
|
|
| |
|
|
A= .370 |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
SK2600 Series Standard Slot |
|
|
|
|
|
| |
|
|
|
|
A= .302 |
|
|
|
|
|
|
| |
|
|
|
SK26S51 Series Phillips Head |
|
|
|
|
|
| |
|
|
|
|
A= .302 |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
| |
Note: 2600 Series Studs
will not fit SK212-10 Series Receptacles.
Use SK212-12 or SK213 Series Receptacle |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PG 5 |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
| |
|
|
|
| Skybolt CLoc® SK2600 Winged &
Folding Ring Series |
|
|
|
| Stainless
& Skytanium® |
|
|
|
|
|
| 3 - Piece
Series (Stud/Retainer - Locking
Receptacle) |
|
|
|
| |
|
TSO-C148 Approved.
Designed to Exceed NASM5591 |
|
|
|
| |
Tensile/Shear Loads of 200 LBS Working - 300 Lbs Plus Ultimate |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
 |
|
|
|
SK2600R and ZG2600R
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
SK2600W and ZG2600W |
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| Note:
2600 Series Studs will not fit SK212-10 Series Receptacles. Use SK212-12 or SK213 Series Receptacle |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
PG 6 |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
| |
Skybolt CLoc®
SK2700 Flush Head Series |
|
|
|
| |
Stainless |
|
|
|
| |
3 - Piece Series (Stud/Retainer - Locking Receptacle) |
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
TSO-C148 Approved.
Designed to Exceed NASM5591 |
|
|
|
| |
Tensile/Shear Loads of 200 LBS Working - 300 Lbs Plus Ultimate |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
SK27S3S
|
|
|
|
|
SK2700S
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
Note: 2700 Series Studs
will not fit SK212-10 Series Receptacles.
Use SK212-12 or SK213 Series Receptacle |
|
|
|
| SK212 Series |
SK213 Series |
|
|
|
|
|
|
|
| Fixed Depth |
Adjustable Depth |
|
|
|
|
|
|
|
| Receptacle |
Receptacle |
|
|
|
|
|
|
|
| Combined Panel |
Combined Panel |
|
Total |
Flush Head |
|
|
| Thickness |
Thickness |
Thickness |
|
Stud Length |
2700 Series Stud |
|
|
| Decimal |
Millimeter |
Decimal |
Millimeter |
|
L |
Stainless |
Stainless |
|
|
| Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
Decimal |
Millimeter |
Standard Slot |
Phillips |
|
|
| .030 |
.059 |
0.762 |
1.499 |
.010 |
.390 |
0.254 |
9.906 |
.610 |
15.494 |
SK2700-1S |
SK27S3-1S |
|
|
| .060 |
.089 |
1.524 |
2.261 |
.040 |
.400 |
1.016 |
10.160 |
.640 |
16.256 |
SK2700-2S |
SK27S3-2S |
|
|
| .090 |
.119 |
2.286 |
3.023 |
.070 |
.430 |
1.778 |
10.922 |
.670 |
17.018 |
SK2700-3S |
SK27S3-3S |
|
|
| .120 |
.149 |
3.048 |
3.785 |
.100 |
.460 |
2.540 |
11.684 |
.700 |
17.780 |
SK2700-4S |
SK27S3-4S |
|
|
| .150 |
.179 |
3.810 |
4.547 |
.130 |
.490 |
3.302 |
12.446 |
.730 |
18.542 |
SK2700-5S |
SK27S3-5S |
|
|
| .180 |
.209 |
4.572 |
5.309 |
.160 |
.520 |
4.064 |
13.208 |
.760 |
19.304 |
SK2700-6S |
SK27S3-6S |
|
|
| .210 |
.239 |
5.334 |
6.071 |
.190 |
.550 |
4.826 |
13.970 |
.790 |
20.066 |
SK2700-7S |
SK27S3-7S |
|
|
| .240 |
.269 |
6.096 |
6.833 |
.220 |
.580 |
5.588 |
14.732 |
.820 |
20.828 |
SK2700-8S |
SK27S3-8S |
|
|
| .270 |
.299 |
6.858 |
7.595 |
.250 |
.610 |
6.350 |
15.494 |
.850 |
21.590 |
SK2700-9S |
SK27S3-9S |
|
|
| .300 |
.329 |
7.620 |
8.357 |
.280 |
.640 |
7.112 |
16.256 |
.880 |
22.352 |
SK2700-10S |
SK27S3-10S |
|
|
| .330 |
.359 |
8.382 |
9.119 |
.310 |
.670 |
7.874 |
17.018 |
.910 |
23.114 |
SK2700-11S |
SK27S3-11S |
|
|
| .360 |
.389 |
9.144 |
9.881 |
.340 |
.700 |
8.636 |
17.780 |
.940 |
23.876 |
SK2700-12S |
SK27S3-12S |
|
|
| .390 |
.419 |
9.906 |
10.643 |
.370 |
.730 |
9.398 |
18.542 |
.970 |
24.638 |
SK2700-13S |
SK27S3-13S |
|
|
| .420 |
.449 |
10.668 |
11.405 |
.400 |
.760 |
10.160 |
19.304 |
1.000 |
25.400 |
SK2700-14S |
SK27S3-14S |
|
|
| .450 |
.479 |
11.430 |
12.167 |
.430 |
.790 |
10.922 |
20.066 |
1.030 |
26.162 |
SK2700-15S |
SK27S3-15S |
|
|
| .480 |
.509 |
12.192 |
12.929 |
.460 |
.820 |
11.684 |
20.828 |
1.060 |
26.924 |
SK2700-16S |
SK27S3-16S |
|
|
| |
Note: See page 9 for plating options and part#
suffix |
|
|
|
|
|
|
|
|
|
PG 7 |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| |
Skybolt CLoc®
SK2800 Flush Head Series |
|
|
|
| |
Stainless & Skytanium® |
|
|
|
| |
3 - Piece Series (Stud/Retainer - Locking Receptacle) |
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
TSO-C148 Approved.
Designed to Exceed NASM5591 |
|
|
|
| |
Tensile/Shear Loads of 200 LBS Working - 300 Lbs Plus Ultimate |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
SK28S3 and ZG28S3
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
Note: 2800 Series Studs
will not fit SK212-10 Series Receptacles.
Use SK212-12 or SK213 Series Receptacle |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
PG 8 |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
| Skybolt Cloc ® 2000
Series Retainers |
|
|
|
|
| 3- Piece Series (Stud/ Retainer - Locking
Receptacle |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
| |
SK2600-LWS |
|
SK27S5-1 |
|
|
SK2600-SW |
|
|
|
|
| |
Solid Retaining Ring |
|
Solid Retaining Ring |
|
Split Ring Retainer |
|
|
|
| |
General Purpose |
|
for Dimpled Panels |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
PG 9 |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
|
| |
|
|
|
| |
Skybolt CLoc® 2000
Series Rivet Receptacles |
|
|
|
|
|
| |
3 - Piece Series (Stud/Retainer - Locking Receptacle) |
|
|
|
|
| |
Standard SK212 Fixed
Depth Receptacles |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
Material |
Finish |
Rivet Size |
Weight |
|
|
Material |
Finish |
Rivet Size |
Weight |
|
|
| |
SK212-10 |
Steel |
Zinc |
3/32 |
.0100/4.5g |
|
SK212-12 |
Steel |
Zinc |
3/32 |
.0105/4.8g |
|
|
| |
SK212-10A |
Alum6061 |
None |
3/32 |
.0030/1.4 |
|
SK212-12A |
Alum6061 |
None |
3/32 |
.0040/1.8 |
|
|
| |
SK212-10AB |
Alum6061 |
Anodized |
3/32 |
.0030/1.4 |
|
SK212-12AB1 |
Alum6061 |
Anodized |
3/32 |
.0040/1.8 |
|
|
| |
SK212-10S |
Stain303 |
QQ-P-35 |
3/32 |
.0100/4.5 |
|
SK212-12A8 |
Alum6061 |
None |
1/8 |
.0040/1.8 |
|
|
| |
SK212E10B1 |
Alum6061 |
None |
Bond |
.0030/1.4 |
|
SK212-12A8B1 |
Alum6061 |
Anodized |
1/8 |
.0040/1.8 |
|
|
| |
|
|
|
|
|
* |
SK212-12ACB1 |
Alum6061 |
Anodized |
1/8 |
.0040/1.8 |
|
|
| |
|
|
|
|
|
SK212-12S |
Stain303 |
QQ-P-35 |
3/32 |
.0105/4.8 |
|
|
| |
|
|
|
|
|
SK212E12S |
Stain303 |
QQ-P-35 |
Bond |
.0105/4.8 |
|
|
| |
|
|
|
|
|
|
SK212E12AB1 |
Alum6061 |
Anodized |
Bond |
.0040/1.8 |
|
|
| |
|
|
|
* |
Anti-Chafe |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
SK213 Adjustable
Receptacles |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
SK213-2D Shown |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Standard Adjustable
Depth Receptacles |
|
|
|
|
|
| |
|
Material |
Finish |
Rivet Size |
Weight |
L |
|
|
|
| |
SK213-1 |
Skytanium |
None |
3/32 |
.0070/3.2 |
.410 |
|
|
|
| |
SK213-2 |
Skytanium |
None |
3/32 |
.0070/3.2 |
.530 |
|
|
|
| |
SK213-2D |
Skytanium |
None |
3/32 Dim |
.0070/3.2 |
.530 |
|
|
|
| |
SK213-2A1 |
Skytanium |
Anodized |
3/32 |
.0070/3.2 |
.530 |
|
|
|
|
|
| |
SK213-26 (1) |
) Skytanium |
None |
3/32 |
.0070/3.2 |
.530 |
|
|
|
| |
SK213-28 |
Skytanium |
None |
1/8 |
.0070/3.2 |
.530 |
|
|
|
| |
SK213-5 |
Skytanium |
None |
3/32 |
.0070/3.2 |
.530 |
|
SK213-2
(3/32 Rivet holes) shown |
|
|
|
| |
SK213-58 |
Skytanium |
None |
1/8 |
.0070/3.2 |
.530 |
|
SK213-28
(1/8 Rivet Holes) |
|
|
|
| |
SK213E2A1 |
Skytanium |
Anodized |
Bond |
.0070/3.2 |
.530 |
|
|
|
|
|
| |
Note: SK213-26 has 11/16
Rivet Spacing |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PG 10 |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
| |
|
|
|
| |
Skybolt CLoc® 2000 Series Flare Receptacles |
|
|
|
| |
3 - Piece Series (Stud/Retainer - Locking Receptacle) |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
New -
CLoc® Rivetless Easy
Install Receptacles - Flare Technology
US Patent Pending |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| Use
Flaring Tool SK-FT1 |
|
PG 11 |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
| |
|
|
|
| Skybolt CLoc® 2000 Series Threaded Receptacles |
|
|
|
|
SK210-2S |
Blind Receptacle -
Countersunk Flange |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
Excellent for wood,
plastic, or composite structures. |
|
|
|
| |
|
|
Non-Adjustable Depth -
Recommend Phillips Studs |
|
|
|
| |
|
|
Self locking when tapped
as suggested or use adhesive |
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
Protruding |
Outer Panel |
|
Outer Panel |
|
|
|
|
| |
|
|
Stud |
Thickness(1) |
Stud |
Thickness(1) |
|
|
|
|
|
|
|
SK26S51-3 |
.010-.060 |
|
|
|
|
|
|
|
| |
|
|
SK26S51-4 |
.060-.090 |
SK28S3-4S |
.010-.030 |
|
|
|
|
| |
|
|
SK26S51-5 |
.090-.120 |
SK28S3-5S |
.030-.060 |
|
|
|
|
| |
|
|
SK26S51-6 |
.120-.150 |
SK28S3-6S |
.060-.090 |
|
|
|
|
| |
|
|
SK26S51-7 |
.150-.180 |
SK28S3-7S |
.090-.120 |
|
|
|
|
| |
|
|
SK26S51-8 |
.180-.210 |
SK28S3-8S |
.120-.150 |
|
|
|
|
| |
|
|
SK26S51-9 |
.210-.240 |
SK28S3-9S |
.150-.180 |
|
|
|
|
| |
|
|
SK26S51-10 |
.240-.270 |
SK28S3-10S |
.180-.210 |
|
|
|
|
| |
|
|
SK26S51-11 |
.270-.300 |
SK28S3-11S |
.210-.240 |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
Outer Panel Hole (To
.065) |
|
Drill .257 |
|
|
|
|
| |
|
|
Outer Panel Hole
(Greater than .065) |
|
Drill .281 |
|
|
|
|
| |
|
|
Support Hole |
|
|
Drill 13/32 (1) |
|
|
|
|
| |
|
|
Tap |
|
|
1/2-13 |
|
|
|
|
| |
|
|
Receptacle Length |
|
.600 |
|
|
|
| |
|
|
Note: Total length with stud engaged = .700 |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| SK210-30S |
|
SK210-31S |
Blind Receptacle -
Adjustable Depth |
|
|
|
|
|
|
|
|
|
|
| |
|
|
Excellent for wood,
plastic, or composite structures. |
|
|
|
| |
|
|
Adjustable
Depth |
|
|
|
| |
|
|
Self locking when tapped
as suggested or use adhesive |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
Protruding |
|
Outer Panel |
|
Flush |
Outer Panel |
|
|
|
| |
|
|
Stud |
|
Thickness(2) |
|
Stud |
Thickness(2) |
|
|
|
| |
|
|
SK26S51-1 |
|
.100-.130 |
|
SK28S3-1S |
.040-.070 |
|
|
|
| |
|
|
SK26S51-2 |
|
.130-.160 |
|
SK28S3-2S |
.070-.100 |
|
|
|
| |
|
|
SK26S51-3 |
|
.160-.190 |
|
SK28S3-3S |
.100-.130 |
|
|
|
| |
|
|
SK26S51-4 |
|
.190-.220 |
|
SK28S3-4S |
.130-.160 |
|
|
|
| |
|
|
SK26S51-5 |
|
.220-.250 |
|
SK28S3-5S |
.160-.190 |
|
|
|
| |
|
|
SK26S51-6 |
|
.250-.280 |
|
SK28S3-6S |
.190-.220 |
|
|
|
| |
|
|
SK26S51-7 |
|
.280-.310 |
|
SK28S3-7S |
.220-.250 |
|
|
|
| |
|
|
SK26S51-8 |
|
.310-.340 |
|
SK28S3-8S |
.250-.280 |
|
|
|
| |
|
|
SK26S51-9 |
|
.340-.370 |
|
SK28S3-9S |
.280-.310 |
|
|
|
| |
|
|
SK26S51-10 |
|
.370-.400 |
|
SK28S3-10S |
.310-.340 |
|
|
|
| |
|
|
SK26S51-11 |
|
.400-.430 |
|
SK28S3-11S |
.340-.370 |
|
|
|
| |
|
|
SK210-30S |
(For Wood) |
|
SK210-31S |
|
(For Metals) |
|
|
|
| Outer
Panel Hole (To .065) |
|
|
Drill .257 |
|
|
Drill .257 |
|
|
|
|
|
| Outer
Panel Hole (Greater than .065) |
|
Drill .281 |
|
|
Drill .281 |
|
|
|
|
|
| Support Hole |
|
|
Drill 13/32 (1) |
|
|
Drill 13/32 |
|
|
|
|
|
| Tap |
|
|
|
1/2-13 |
|
|
7/16-20 |
|
|
|
|
|
| |
|
|
|
|
|
|
| Receptacle
Length |
|
.476 |
Note: Total length with stud engaged = .575 |
|
|
|
| Note
(1) Undersized drill favorable for
thread locking in wood |
|
|
|
|
|
| Note
(2): Assumes SK210 is set flush with
support panel surface. All values
decrease for the given stud if |
|
|
|
| SK210 receptacle is set
below inner panel surface. All values
increase if receptacle is protruding. |
|
|
|
| |
|
|
|
|
|
|
|
|
PG 12 |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
| |
|
|
|
| Skybolt CLoc® 2000 Series Threaded Receptacles |
|
|
|
| SK211-2S |
Nut Retained Receptacle - Flange - 303 Stainless |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
Excellent for any
Non-Blind Mounting Application |
|
|
|
| |
|
|
Non-Adjustable Depth |
|
|
|
|
| |
|
|
Use thread locking
compound to secure nut |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
Protruding |
Outer Panel |
|
Flush |
Outer Panel |
|
|
|
| |
|
|
Stud |
Thickness |
|
Stud |
Thickness |
|
|
|
| Outer
Panel Hole (To .065) |
|
Drill .257 |
|
SK26S51-2 |
.010-.030 |
|
|
|
|
|
|
| Outer
Panel Hole (Greater than .065) |
|
Drill .281 |
|
SK26S51-3 |
.030-.060 |
|
|
|
|
|
|
| Support Hole |
|
|
|
Drill 1/2 |
|
SK26S51-4 |
.060-.090 |
|
SK28S3-4S |
.010-.030 |
|
|
|
| Min/Max
Recommended Support Panel Thickness |
0 to 1/4 Inch |
|
SK26S51-5 |
.090-.120 |
|
SK28S3-5S |
.030-.060 |
|
|
|
| |
|
|
SK26S51-6 |
.120-.150 |
|
SK28S3-6S |
.060-.090 |
|
|
|
| |
|
|
|
SK26S51-7 |
.150-.180 |
|
SK28S3-7S |
.090-.120 |
|
|
|
| |
|
|
SK26S51-8 |
.180-.210 |
|
SK28S3-8S |
.120-.150 |
|
|
|
| |
|
|
SK26S51-9 |
.210-.240 |
|
SK28S3-9S |
.150-.180 |
|
|
|
| |
|
|
|
SK26S51-10 |
.240-.270 |
|
SK28S3-10S |
.180-.210 |
|
|
|
| |
|
|
SK26S51-11 |
.270-.300 |
|
SK28S3-11S |
.210-.240 |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| SK211-32A |
Nut Retained Receptacle - Flange - Aluminum |
|
|
|
|
|
|
|
|
 |
|
|
Developed for NASCAR and Racing Applications
|
|
|
|
|
Excellent for any Non-Blind Mounting Application |
|
|
|
| |
|
|
Non-Adjustable Depth |
|
|
|
| |
|
|
Use Thread Locking compond
to secure nut |
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
Protruding |
Outer Panel |
|
Flush |
Outer Panel |
|
|
|
| |
|
|
|
|
Stud |
Thickness |
|
Stud |
Thickness |
|
|
|
| |
|
|
|
|
SK26S51-2 |
.010-.030 |
|
|
|
|
|
|
| |
|
|
|
|
SK26S51-3 |
.030-.060 |
|
|
|
|
|
|
| |
|
|
|
|
SK26S51-4 |
.060-.090 |
|
SK28S3-4S |
.010-.030 |
|
|
|
| |
|
|
|
|
SK26S51-5 |
.090-.120 |
|
SK28S3-5S |
.030-.060 |
|
|
|
| |
|
|
|
|
SK26S51-6 |
.120-.150 |
|
SK28S3-6S |
.060-.090 |
|
|
|
| Outer
Panel Hole (To .065) |
|
Drill .257 |
|
SK26S51-7 |
.150-.180 |
|
SK28S3-7S |
.090-.120 |
|
|
|
| Outer
Panel Hole (Greater than .065) |
|
Drill .281 |
|
SK26S51-8 |
.180-.210 |
|
SK28S3-8S |
.120-.150 |
|
|
|
| Support Hole |
|
|
|
Drill 1/2 |
|
SK26S51-9 |
.210-.240 |
|
SK28S3-9S |
.150-.180 |
|
|
|
| Min/Max
Recommended Support Panel Thickness |
0 to 1/4 Inch |
|
SK26S51-10 |
.240-.270 |
|
SK28S3-10S |
.180-.210 |
|
|
|
| |
|
|
|
|
SK26S51-11 |
.270-.300 |
|
SK28S3-11S |
.210-.240 |
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
PG 13 |
Copyright 2010 Some Part #s Special Order Only |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
